Description
The ceramic kiln is a rotary cylinder device for calcining all kinds of ceramsite. It is widely used in black metallurgy, nonferrous metallurgy, chemical industry, building materials (cement), nonmetallic ore, refractory materials, papermaking, environmental protection and other industries, with a high volume, long kiln life, high operating rate, stable operation, heat transfer efficiency High, low heat consumption characteristics, is the ideal calcination equipment. Rotary kiln by the rotary cylinder, support device, with wheel support device and kiln head, kiln seal device, coal injection pipe device and other components. Kiln body and the level of a certain degree of slope, the entire kiln by the wheel device support, and control the kiln body up and down the wheel device. In addition to the main part of the transmission set, but also set to ensure that the main drive power is interrupted when the kiln can still slow rotation, to prevent deformation of the kiln auxiliary drive. The kiln is sealed with a hood, and the kiln is equipped with an axial contact seal to ensure the reliability of the seal. In the ferrous metallurgy industry, rotary kiln is used in the production of iron oxide pellets, iron ore direct reduction, ultrafine iron concentrate and blast furnace ash recycling; in nonferrous metallurgy, rotary kiln can be used for oxidation roasting, Sulfation roasting, nano roasting, chlorination roasting, separation roasting, etc., is also widely used in alumina preparation.
Ceramics rotary kiln refers to the rotation of calcined kiln (commonly known as rotary kiln), belonging to building materials equipment category. In recent years, with the national environmental policy, the implementation of resource use policy, ceramic kiln gradually replaced the backward facilities, pollution, high energy consumption of ceramic clay kiln, vertical kiln. Ceramic sand drum kiln according to the different materials can be divided into cement kiln, metallurgical chemical kiln and lime kiln and so on. The kiln body is composed of the cylinder, the refractory lining, the transmission device, the support wheel, the kiln head, the kiln tail seal, the kiln hood and the burning device and so on. The kiln body is a heated rotating part, The use of high-quality corrugated steel plate welded, the cylinder through the belt support in the 2 to 7 block sliding or rolling bearing support device, and in which a block or block support device is equipped with mechanical or hydraulic wheel to control the tube The transmission of the body through the ring gear located in the middle of the cylinder so that the cylinder according to the required speed of rotation; due to the installation and maintenance needs, the larger kiln is equipped with a very low speed rotation of the auxiliary Transmission device; in order to prevent the cold air into the smoke and dust spill the cylinder, in the cylinder feed end (tail) and the discharge end (head) with a reliable kiln and kiln head sealing device. The cylinder is provided with a temperature measuring and sampling hole device, the kiln hood is provided with a pressure measuring element, the larger kiln can also set the infrared.
Ceramics rotary kiln on the one hand is the combustion equipment, where the combustion of coal in the heat; also heat transfer equipment, raw materials to absorb the heat of the gas for calcination. In addition, sometimes transport equipment, raw materials from the feed side to the discharge side. And fuel combustion, heat transfer and raw material movement must be reasonable between the three in order to make the heat generated by the combustion of fuel in the kiln through the kiln kiln timely delivery of raw materials to achieve high yield, high quality, low The purpose of consumption.
A, Ceramic kiln rotary kiln at home and abroad using the most advanced hydraulic wheel device.
B, Pottery kiln with high measurement accuracy of the measurement of piston pump.
C, High-precision speed control valve and contact graphite block seal and other domestic advanced technology.
D, Ceramic sand kiln easy to operate, the use of reliable.
E,The stability of the thermal system, improve the equipment operating rate.
F, Ceramic kiln compared with the same specifications equipment, the operating rate increased by 10%, production increased by 5% -10%, 15% lower heat.
More information of Ceramics Rotary Kiln PLS contact me:
TEL:0086 18568631888
WS:0086 13663831568
E-mail：tongjiagroup@163.com
