Description
The DJ series products are mainly used for continuous conveying of bulk materials with large inclination, and the conveyor belts with corrugated edges and diaphragms are used. The conveying angle is 0-90o (less than 70O). Its characteristic is that it can be conveyed horizontally in a narrow space with a equipment. It has the advantages of high reliability of the horizontal or small inclination angle transportation of the general belt conveyor, energy saving and the reliable economy of the hoist of the bucket elevator. This series of products are widely used in coal, grain, building materials, chemical, hydroelectric, metallurgy and other departments. In the range of environmental temperature of -19 C ---+40 C, the bulk density is 0.5-2.5t/? Materials with special requirements, such as high temperature resistance or materials with acid, alkaline, oil material, organic solvents, etc., must be put forward at the time of order and use the special side conveyer belt of the corresponding materials.
Advantages and uses of large angle conveyor:
The corrugated baffle, diaphragm and baseband form the "gate" device for conveying materials, so as to realize large inclination transportation.
Driving device: the power part of conveyor is composed of Y series motor, ZJ shaft mounted reducer and wedge type backstop.
Drive roller: it is the main part of power transmission, the conveyor belt is operated by the friction force between the driving roller, the roller has the glue surface and the light surface, and the rubber surface roller is to increase the adhesion between the roller and the conveyor belt.
Change drum: it is used to change the direction of the conveyor belt, and the change drum is used for conveying the lower surface of the conveyor belt.
Belt pulley: used to change the direction of the conveyor belt, and the belt pulley is used for the upper surface of the conveyor belt (bearing surface).
Idlers: idlers are used to support the conveyor belt and the materials on the belt and make them operate stably. This series has two types: upper parallel rollers and lower flat idlers.
The belt roller: the belt roller is used to support and transport the lower branch on the frame of the convex arc section, which is supported on the empty edge of the side of the side of the conveyer belt, and forms a circular arc section of a number of tub rollers to make the conveyer belt to be reformed and the supporting roller is supported by the cantilever.
Vertical roller: vertical roller is used to restrict the deviation of the conveyor belt, and is installed on the upper and lower parts of the upper stage frame, each rack has 4, upper and lower sub two.
Flapping wheel cleaning device: used to flap the back of the conveyor belt and shake down the material stuck to the conveyor belt.
Tightening device: its functions are as follows: 1. the conveyor belt has enough tension to ensure that the conveyor belt and the drive roller are not skidding between the.2. and the conveyor belt, which limits the sag between the supports, the normal operation of the conveyor, and the series of spiral tightening devices.
Frame, head funnel, head shield, guide slot, middle frame, middle bracket leg and so on: support, dustproof and guide function in the conveyor. The series of middle bracket legs are low, Chinese and high three, flat and inclined only with low intermediate bracket leg, and the upper and the water flat section is based on different headframe (low type). The Chinese style and the high style head rack are equipped with different intermediate legs (low type, Chinese style and high intermediate leg).
