SLVTM Superfine Powder Mill is a new product absorbed high-tech abroad. Power (325-3000mesh)is made by roller with stress milling materials90-15mm) on millstone.
SLVTM Superfine Powder Mill is a new product absorbed high-tech abroad. Power (325-3000mesh)is made by roller with stress milling materials90-15mm) on millstone. The full contact among roller ,millstone ,materials and precision of grading system shows the high-tech. Under the same conditions, the production capacity and fineness is three times and 500 mesh higher than that of Raymond and medium-speed mill respectively, exceeding the fineness limit of wet stirred mill, which, has been the first choice of high-tech, efficiency and energy- saving mill. This mill is ideally suitable for metallurgy, electricity, chemical,cement, refractory especially non-metallic minerals.
The integration of milling, power selecting and drying makes it more convenient.Compared with other mills, it possesses more advantages:high-efficiency,energy-saving, less consumption,optimum milling and drying performance,easy adjustment of
fineness and replacement of quick-wear part uniform particles, less noise and dust, simple flow and operation, small volume,better economic benefits,which, receives more and more attention and has been widely used for the milling of calcium carbonate, quartz, fluorite, calcite, kaolin, stone, filaments, electrolytic manganese, phosphate rock, gypsum powder, quartz sand, silicon metal etc.
Technology innovation of SLVTM Superfine Powder Mill :when millstone and roller rotate driven by electric motor through speed reducer and belt respectively, hot air is sent into the mill and materials falling on the millstone move to the edge driven by centrifugal force and milled when going through the ring groove on millstone,with the effect ofhigh-speed airflow,qualified powder is sent into pollination device while large particles fall onto the millstone for a second time milling . Wet materials is dried by hot air . In the air flow circulation process,excess gas and lighter impurities in final product are collected by dust collector, forming a quite scientific and advanced technological process.
Advantages of SLVTM Superfine Powder Mill:
Low cost. Less energy consumption,high efficiency, 40-50% electricity is saved compared with ball mill and Raymond mill. The special material makes roller sleeve and lining board durable and low cost, also decreases the pollution of product. External circulation device can further reduces power consumption and improves product accuracy.
Low construction cost.The integration of crushing,drying, milling, grading and conveying makes the area it covered decreases by 70% compared with ball mill.
Easy operation. Equipped with automatic control and separation device between roll sleeve and lining board, it can be controlled remotely and no destructive vibration will happen.
Easy maintenance. Roller sleeve and hard-wearing inner wear can be changed just by overhauling the sliding frame of hydro-cylinder. Material of hard -wearing ring is 50SiMn.
Less pollution, vibration and noise. Negative pressure operation and no dust overflow.
High-quality. It is easy to check and control chemical composition of product, high precision classifier it equipped can grade product of 325 mesh accurately, making final product with high quality.
More information of the SLVTM Superfine Powder MillPLS contact me:
