Cyclone dust collector is most suitable for the following circumstances:
1), Capture coarse dust particles;
2), The dust removal efficiency is not demanding occasions;
3), Air dust is very high;
4), With other
1, Parallel use
Cyclone dust collectors are often used in parallel for the purpose of meeting the large amount of air treated because the small diameter cyclone is more efficient (usually two and quadruple). Its ash can be shared with a set of ash bucket.
2, Used in series
Experiments show that in the case of normal inlet wind speed, the total efficiency of the two cyclones in series is lower than the single dust collector with the same pressure drop. In this case, in some cases can still consider the use of series: 1), for fragile materials, taking into account the dust in the airflow speed can not be too high; 2), to prevent accidents, the use of series to do the backup.
Cyclone dust removal efficiency is generally increased with the increase in dust load, and therefore commonly used as a first-class dust collector, in order to facilitate the handling of high dust load capacity. While the second level can be used with high efficiency and the load can not be high bag filter or wet dust collector. In addition: use it to prevent the bulk material or can cause a fire, the explosion of materials into the second stage dust collector.
Working principle:
Cyclone dust collector after the installation of its working principle is the dust from the inlet tangential into the air flow in the access to the rotation at the same time, the air flow, the next split to form a double-screw movement, dust in the double spiral cob boundaries generated strong The coarse dust particles are separated from the outer wall by the lower spin air, and some of the dust is led by the middle of the bypass separation chamber, and the remaining dust is brought into the hopper by the downward airflow. The agglomeration airflow has the effect of gathering dust on the fine particles, thus improving the dust removal efficiency. This part of the smaller dust particles, from the upper spiral air flow to the upper part of the top cover under the formation of a strong rotation of the dust ring, and with the suprachial air flow into the bypass separation chamber upper hole, the return air into the cone And the internal air confluence, the purified gas from the exhaust pipe, the separation of dust into the hopper.
Dust gas from the top of the device into the equipment after the inlet, the high speed through the cyclone separator, so that the dust along the axis of adjustment spiral rotation, the use of centrifugal force, remove coarse particles of dust, effectively control the initial entry into the electric field Dust concentration. Then, the gas enters the electric field through the lower hopper, because the cross-sectional area of the ash bucket is larger than the inner tube cut-off several times, according to the principle of constant torque, radial wind speed and axial wind speed to reduce the zero-speed interface Of the heavy particles of dust settling in the lower ash bucket, reducing the dust into the electric field concentration, low concentration of dust dust through the dust and condensed in the anode plate, the dust and the dust will be collected by the lock air Ash device delivery away. In order to prevent the inner tube whirlwind and the electric field plate after the rapping in the next ash bucket formed in the second dust, especially in the next hopper set in the isolation cone.
The use of the scope of cement, fertilizer, and other industries a variety of mill, broken point under the mouth, packaging machines and drying machines and a variety of similar decentralized source treatment.
More information of the Cyclone Dust Filter PLS contact me:
TEL:0086 18568631888
WS:0086 13663831568
E-mail：tongjiagroup@163.com
