Under the influence of high temperature, many lime production lines need to have large energy consumption of equipment, fast consumption of easily damaged parts, poor quality of calcined products and even automatic shutdown. Especially in the case of extra high temperature of lime kiln, it is easy to cause problems and dangers in some places. How can we make our calcareous kiln run safely and smoothly in the heat? Let's start with the following:
Operator:
Summer temperature is high, staff can not get good rest, working environment is not low temperature. In such a background, it is easy to appear the phenomenon of poor working condition, wrong operation, inadvertent view of data, which leads to problems in the quality of calcined products, which can not be found in time. So in the summer to the staff rest and work environment must do more attention.
Power systems:
In fact , the bearing of the power system and the linkage part also belong to the bad condition in the case of high temperature , and the icing in winter is the same property . When the maintenance is maintained , the lubrication coefficient of the power system is reduced , and the maintenance is carried out under the guidance of the professional personnel . Therefore , the power system of the lime kiln is equivalent to the engine of the automobile , so that the lime kiln power system is the heavy weight in the lime kiln production line .
Power system:
Summer temperatures are high, plus calcareous kilns around 1100 degrees Celsius, and the surrounding temperatures are quite high. The insulation packaging of electric wire under high temperature is the easiest to accelerate aging, so our power system must pay attention to check, otherwise the leakage is very dangerous, which leads to the accident.
Inspection of breakable parts:
The wearing parts of the lime kiln must be carefully checked , because the heat dissipation performance of the metal is greatly reduced in the high - temperature state , so that no matter whether the dragging wheel , the gear wheel , the size gear , the wheel belt and the like are subjected to great pressure , we must carefully check whether any cracks appear , and if the cracks are immediately replaced , more problems occur .
Shutdown maintenance:
Generally, rotary kilns work about 300 days a year, so if the lime kilns have completed their tasks due to market reasons, then the shutdown must be carried out in order, and before turning off the machines, we must confirm the total output of the materials in the kilns. After shutdown, need certification and maintenance, clean up inlet and outlet waste, foreign body. Xinxiang Tongjia Industry specializes in developing and producing lime kiln equipment. If you encounter problems in summer maintenance, please call our hotline and we will provide you with the most appropriate solution in the first time.
More information about the Rotary Kiln ,PLS contact me:
