Wet-washing Filter structures

Wet washing filter is widely use on chemical industries to catch the waste harmful gas.Because of its'extremely structures，more and more processing line choose it.

Belowing is the details of wet filter.

1, washing filter, with high efficiency of dust removal and desulfurization, catching more harmful gas,widely use on lime production lines.
BYJ flue gas purifier combines desulphurization and dedusting as a whole. It is unique in the design of spray nozzle. It uses the spiral nozzles made by American technology. Under certain water pressure, the dense layer of water mist is ejected, dust and harmful gas are fully contacted with water mist, so the effect of dust removal, desulphurization, nitrogen removal and washing carbon black is more effective. Other wet dust remover has great improvement. The removal rate is more than 98%, the removal rate of sulfur dioxide is more than 85%, and the smoke level is <1.

2, the design of dehydrating plate is reasonable and unique, and the dehydration effect is good. The dehydration device is set in the barrel, and the dehydrating plate is designed reasonably and uniquely. When the mist is passed through the dehydrating device, it is collided and intercepting, and the water is prevented by two times and the dehydration efficiency is high.

3, small resistance, water saving, electricity saving, low operating costs.
The smoke is naturally introduced from the lower part of the cylinder, with large cross section and low wind speed. Therefore, the smoke resistance is small, the main resistance is less than 900Pa, and the resistance of the system is less than 1200Pa. Because the resistance is small, the power consumption is small. In addition, the discharge of water through precipitation, closed cycle use, on the one hand save water resources, on the other hand to prevent sewage flow into the sewer, causing two pollution, to save water and save electricity, and reduce the cost of operation.

4, small size, light weight, small footprint, convenient installation and transportation.
The cylindrical body, which belongs to the whole structure, is equipped with its own support when it comes out of the factory. It is very convenient to install and remove. It can be installed in various ways, such as hanging in the left and right side, overhead laying, and so on, with very strong adaptability.

5, the operation is relatively simple, convenient, minimal maintenance, easy operation, management, maintenance, high running rate, and adapt to all kinds of different working environments.

6,it is adaptable to the concentration fluctuation of SO2 in the flue gas. Different desulphurization processes can adapt to the sulfur content in different coal. The desulfurizer can choose a variety of forms such as lime, alkali, Magnesium Oxide and so on, all of which can achieve good desulfurization effect.