The safety operation rules of the fire workers in the rotary

13, in the case of sudden power outages, should immediately start the backup power rotary kiln.
 
14.When going up and down a ladder in rain and snow, hold on to the railing to prevent falling and falling.
 
15, in the support wheel and motor, reducer, gear and other parts of the maintenance refueling, to avoid kiln and operating parts, to prevent burns.
 
16，Kiln head must have gas mask, dry powder fire extinguisher, yellow mud, wet bag and other fire extinguishing tools.
 
17，At the same time, they should wear CO alarm, oxygen respirator or gas mask, monitor the kiln mouth, and provide necessary contact signal. When CO concentration in kiln is higher than 100PPm, it is not allowed to enter operation.
 
18，The CO concentration around the rotary kiln must not be higher than 50 ppm. At the same time before entering the rotary kiln must blow to the rotary kiln 20-30 minutes.

 
19, The kiln stopped for more than 24 hours, must do the gas explosion experiment when igniting the fire. Gas sealing must be checked more than twice per shift during maintenance and ventilation is maintained at the outlet.
 
20, cloudy and rainy days shall not be carried out gas release, air-defense operations.
 
21, the fire on the gas equipment must be issued a "fire permit." In case of gas accident, according to the procedure of "emergency rescue plan for gas accident", the relevant personnel and department should be reported immediately and corresponding measures should be taken.